Accessories & Extras
cases
Cabinets & Promotional supports
16 results

WDCC Display Case: Retail Triple Cabinet
These 3-bay WDCC retail showcases were commonly used to display WDCC figurines in Disney shops or authorized dealer stores.

  • Magic Glass Fine Showcases
  • Size: ~70" L x ~80" H x ~24" D
  • Key included.
  • Three glass display bays (left / center / right) - Front-loading
  • Built-in spot lighting in the top to illuminate figurines
  • Gold plaque with Walt Disney signature and "Classics Collection" branding
  • Metal/glass structure with brass shelf supports
  • Large base pedestal for stability and storage of electrical components
  • No pull-out storage drawer
  • Produced in 1994
  • Roughly estimation: $3,000 - $5,000

WDCC Display Case: Retail Filmstrip Header - Thin
These showcases were commonly used to display WDCC figurines in Disney shops or authorized dealer stores.

  • Magic Glass Fine Showcases
  • Size: 24.5" L x 81.5" H
  • Key included.
  • Front-loading.
  • 4 thick glass shelves (about 11.75 inches space between each).
  • Filmstrip design header referencing Disney animation film. The filmstrip design at the top was meant to evoke the original animation film reels used by Disney animators. It visually tied the figurines to Disney's animation heritage.
  • Front and back plaque. Gold plaque with Walt Disney signature and "Classics Collection" branding
  • Metal/glass structure with brass shelf supports
  • Built-in spot lighting in the top to illuminate figurines.
  • Pull-out storage drawer
  • Produced in 1996
  • Roughly estimation: $1,000 - $4,000

WDCC Display Case: Retail Filmstrip Header - Large - Side-Loading
These showcases were commonly used to display WDCC figurines in Disney shops or authorized dealer stores.

  • Magic Glass Fine Showcases
  • Size: 35" L x 81" H x 21" D
  • Key included.
  • Side-loading.
  • Built-in spot lighting in the top to illuminate figurines - 6 LED lights installed in the top area with an on/off switch control on the A/C cord (5 for the case, 1 for the top area).
  • 4 removable thick glass shelves (about 11.75 inches space between each).
  • Glass display case with multiple adjustable glass shelves.
  • Filmstrip design header referencing Disney animation film. The filmstrip design at the top was meant to evoke the original animation film reels used by Disney animators. It visually tied the figurines to Disney's animation heritage.
  • Front and back plaque. Gold plaque with Walt Disney signature and "Classics Collection" branding
  • Metal/glass structure with brass shelf supports
  • Large base pedestal for stability and storage of electrical components
  • Pull-out storage drawer
  • Produced between 1994 and 2002
  • Roughly estimation: $1,000 - $4,000

WDCC Display Case: Retail Filmstrip Header - Large - Front-Loading
These showcases were commonly used to display WDCC figurines in Disney shops or authorized dealer stores.

  • Magic Glass Fine Showcases
  • Size: 36" L x 82" H x 24" D
  • Key included.
  • Front-loading (2 doors).
  • Built-in spot lighting in the top to illuminate figurines - 6 LED lights installed in the top area with an on/off switch control on the A/C cord (5 for the case, 1 for the top area).
  • 4 removable thick glass shelves (about 11.75 inches space between each).
  • Glass display case with multiple adjustable glass shelves.
  • Filmstrip design header referencing Disney animation film. The filmstrip design at the top was meant to evoke the original animation film reels used by Disney animators. It visually tied the figurines to Disney's animation heritage.
  • Front and back plaque. Gold plaque with Walt Disney signature and "Classics Collection" branding
  • Metal/glass structure with brass shelf supports
  • Large base pedestal for stability and storage of electrical components
  • Pull-out storage drawer
  • Produced between 1994 and 2002
  • Roughly estimation: $1,000 - $4,000

WDCC Display Case: Enchanted Places Rotating center
These rotating center showcases were commonly used to display WDCC figurines from the Enchanted Places collection in Disney shops or authorized dealer stores.

  • Magic Glass Fine Showcases
  • Key included.
  • Front-loading.
  • Built-in spot lighting in the top to illuminate figurines
  • Enchanted Places plaque
  • Metal/glass structure with brass shelf supports
  • Large base pedestal for stability and storage of electrical components
  • Pull-out storage drawer
  • Produced in 1995
  • Roughly estimation: $1,000 - $5,000

WDCC Display Case: Counter-top - One shelf
These showcases were commonly used to display WDCC figurines in Disney shops or authorized dealer stores.

  • Magic Glass Fine Showcases
  • Size: 20" L x 15.5"H x 12.5"D
  • Weight: 25.5 LBS
  • Key included.
  • Side-loading.
  • No lighting.
  • Glass panels on all sides, including the top.
  • Brass hinges and latches.
  • Green WDCC base.
  • Front plate reading "Classics Walt Disney Collection"
  • Mirrored back panel and mirrored floor.
  • Roughly estimation: $400 - $1,500

WDCC Display Case: Counter-top - 2-3 shelves
These showcases were commonly used to display WDCC figurines in Disney shops or authorized dealer stores. They are smaller than the regular ones.

  • Magic Glass Fine Showcases
  • Key included.
  • Size: 20" L x 24"H x 12.5"D
  • Front-loading.
  • 2 thick glass shelves (about 11.75 inches space between each).
  • Front and back plaque. Gold plaque with Walt Disney signature and "Classics Collection" branding
  • Metal/glass structure with brass shelf supports
  • Built-in spot lighting in the top to illuminate figurines.
  • No pull-out storage drawer
  • Produced between 1993 and 1996
  • Roughly estimation: $500 - $2,000

WDCC Display Case: Animation Library Program Cases
There are known as Animation Library Program and Walt Disney Collectors Society Case.
It was a retail promotional display created around 1993 when Disney launched the Walt Disney Collectors Society (WDCS) and began distributing WDCC merchandise through authorized dealers.

Unlike the tall WDCC glass cabinets used for figurines, this one was designed to display books, brochures, and membership materials related to the WDCC program.
This display was used by WDCC dealers to present:
  • WDCC Animation Library books
  • WDCS membership binders
  • WDCC catalogs and promotional materials
  • sometimes a small sculpture or promotional object under the glass top
Most WDCC dealer cabinets and display fixtures from that period were produced by Magic Glass Showcases in San Francisco, a company that built retail displays for collectible programs.

WDCC Display Case: Cabinet with pedestal base
These showcases were smaller and with a matching pedestal base.

  • Magic Glass Fine Showcases
  • Key included.
  • Front-loading.
  • No lighting.
  • Glass panels on all sides.
  • Brass hinges and latches.
  • Green WDCC base.
  • Front plate with Walt Disney signature, different from the regular gold plaque
  • Roughly estimation: $500 - $2000

WDCC Display: Stand
These black rectangular stands are used to display WDCC figurines or WDCC plaques.

  • Size: 6" L x 1"H x 4"D
  • Weight: 2 LBS
  • Glossy black wood or lacquered composite base
  • Engraved in gold with Walt Disney signature
  • Roughly estimation: $30 - $150

WDCC Display: Stand
These black rectangular stands are used to display WDCC figurines or WDCC plaques.

  • Size: 6" L x 1.25"H x 4"D
  • Weight: 2 LBS
  • Glossy black wood or lacquered composite base
  • Engraved in gold with Walt Disney signature
  • Roughly estimation: $30 - $150

WDCC Display: Mickey Plaque
This plaque was used in front of WDCC sculptures or for WDCC Sculptors signature.

  • Size: 4-1/4" X 3-1/2"
  • Acrylic
  • Small WDCC mark with Walt Disney signature
  • Roughly estimation: $100 - $250

WDCC Display: Cube Stand
These black stands are used to display WDCC figurines or WDCC plaques.

  • Size: 3" L x 3.25"H
  • Weight: 2 LBS
  • Glossy black wood or lacquered composite base
  • Engraved in gold with Walt Disney signature
  • Roughly estimation: $30 - $150

WDCC Display: Acrylic Stand
These acrylic stands are used to display WDCC figurines or WDCC plaques.

  • Size: 3.75" L x 1"H x 3.75"D
  • Weight: 2 LBS
  • Acrylic
  • Small WDCC mark with Walt Disney signature
  • Roughly estimation: $30 - $150

WDCC Display: Acrylic Stand
These acrylic stands are used to display WDCC figurines or WDCC plaques.

  • Size: 6" L x 1"H x 3.75"D
  • Weight: 2 LBS
  • Acrylic
  • Small WDCC mark with Walt Disney signature
  • Roughly estimation: $30 - $150

WDCC Display: Acrylic Riser
These acrylic stands are used to display WDCC figurines or WDCC plaques.

  • Size: 5" H (but various versions exist)
  • Acrylic
  • Small WDCC mark with Walt Disney signature
  • Roughly estimation: $20 - $50



Copyright © 2026 The WDCC Directory - Sitemap - Private Policy - Banners by Sergio Bardon